Power float contractors in Nairobi.
Our office is at Brisma Towers in Ongata Rongai, so Nairobi sites get our fastest response. A free site visit usually happens within a day or two of your call.

years finishing floors since 2005
projects completed across Kenya
square metres of floor finished
WhatsApp reply time in working hours
Power floating in Nairobi, done properly
Most of our Nairobi work is warehouses and godowns in Industrial Area, Baba Dogo and along Mombasa Road. We also finish showrooms, parking decks and residential estates. Because the crew and machines are based nearby, we are on site early on pour day, before the first ready-mix truck.
Every Nairobi job gets the same Renkelly standard: a pre-pour site check, our own ride-on or walk-behind machines, a dry-shake hardener where traffic needs it, joints cut on time and curing from day one.
Areas we cover around Nairobi

What we do in Nairobi
Power floating
A flat, dense, hard-wearing surface finished while the concrete is still workable. There is no separate screed layer to crack or delaminate.
Learn morePower troweling
Closes the surface for a smooth, low-dust, easy-to-clean finish. We can burnish it to a sheen where you want one.
Learn moreScreeding & levelling
Gets the floor level and to the right falls before finishing, so water drains where it should and racking sits true.
Learn moreIndustrial floor hardeners
Much higher abrasion resistance than plain concrete, less dusting and a longer floor life under heavy traffic.
Learn morePolished concrete
A sealed, glossy, low-maintenance floor that reflects light, with no tiles to crack or grout to clean.
Learn moreEpoxy flooring
A seamless, hygienic coating that resists chemicals, with optional anti-slip grit and line marking.
Learn moreFloor repairs & resurfacing
Brings a tired floor back into service without breaking it out.
Learn moreQuestions from Nairobi clients
Do you do power floating in Nairobi?
Yes. We power float warehouse, factory, commercial and residential slabs in Nairobi and nearby areas, including Industrial Area, Baba Dogo & Ruaraka, Embakasi.
How much does power floating cost in Nairobi?
Power floating starts from Ksh 250 per sqm. Sites in Nairobi and the surrounding counties do not usually carry a mobilisation charge. You get a fixed written quote after a free site visit.
How long does a power-floated floor take to cure before use?
You can walk on it after 24 hours and allow light foot traffic within 2 – 3 days. Wait about 7 days before light vehicles and 28 days before heavy forklifts or full racking loads, so the concrete reaches its design strength. Keep the slab moist or under a curing compound for at least the first 7 days.
What is the difference between power floating and an ordinary screed?
Power floating finishes the structural slab itself while it is still fresh, so the surface is part of the concrete. An ordinary screed is a separate layer laid later, which can crack, sound hollow or delaminate. A power-floated floor is flatter, denser and more durable. It usually costs less too, because there is no second layer.
Get a Nairobi quote
Three quick steps. Your details open in WhatsApp, ready to send to our lead engineer.
- Starting from Ksh 250 per sqm
- A fixed written quote after a free site visit
- Our own ride-on & walk-behind machines and trained crew
- A workmanship warranty on every job
Replies come from a lead engineer, not a call centre.