Power float contractors in Kisumu.
We take power floating crews to Kisumu and the lake region for warehouses, factories, commercial buildings and housing developments.

years finishing floors since 2005
projects completed across Kenya
square metres of floor finished
WhatsApp reply time in working hours
Power floating in Kisumu, done properly
Kisumu’s warm, humid weather changes how fast a slab sets. We time the floating and troweling passes to the concrete on the day, not to the clock, so the finish is the same across the whole floor.
Every Kisumu job gets the same Renkelly standard: a pre-pour site check, our own ride-on or walk-behind machines, a dry-shake hardener where traffic needs it, joints cut on time and curing from day one.
Areas we cover around Kisumu

What we do in Kisumu
Power floating
A flat, dense, hard-wearing surface finished while the concrete is still workable. There is no separate screed layer to crack or delaminate.
Learn morePower troweling
Closes the surface for a smooth, low-dust, easy-to-clean finish. We can burnish it to a sheen where you want one.
Learn moreScreeding & levelling
Gets the floor level and to the right falls before finishing, so water drains where it should and racking sits true.
Learn moreIndustrial floor hardeners
Much higher abrasion resistance than plain concrete, less dusting and a longer floor life under heavy traffic.
Learn morePolished concrete
A sealed, glossy, low-maintenance floor that reflects light, with no tiles to crack or grout to clean.
Learn moreEpoxy flooring
A seamless, hygienic coating that resists chemicals, with optional anti-slip grit and line marking.
Learn moreFloor repairs & resurfacing
Brings a tired floor back into service without breaking it out.
Learn moreQuestions from Kisumu clients
Do you do power floating in Kisumu?
Yes. We power float warehouse, factory, commercial and residential slabs in Kisumu and nearby areas, including Kisumu Industrial Area, Mamboleo, Kibos.
How much does power floating cost in Kisumu?
Power floating starts from Ksh 250 per sqm. For Kisumu we add a mobilisation charge, shown separately on your quote. You get a fixed written quote after a free site visit.
How long does a power-floated floor take to cure before use?
You can walk on it after 24 hours and allow light foot traffic within 2 – 3 days. Wait about 7 days before light vehicles and 28 days before heavy forklifts or full racking loads, so the concrete reaches its design strength. Keep the slab moist or under a curing compound for at least the first 7 days.
What is the difference between power floating and an ordinary screed?
Power floating finishes the structural slab itself while it is still fresh, so the surface is part of the concrete. An ordinary screed is a separate layer laid later, which can crack, sound hollow or delaminate. A power-floated floor is flatter, denser and more durable. It usually costs less too, because there is no second layer.
Get a Kisumu quote
Three quick steps. Your details open in WhatsApp, ready to send to our lead engineer.
- Starting from Ksh 250 per sqm
- A fixed written quote after a free site visit
- Our own ride-on & walk-behind machines and trained crew
- A workmanship warranty on every job
Replies come from a lead engineer, not a call centre.